ENEC is the European safety standard mark. The scheme is based on the European full certification scheme of ISO-type5, which was initially established in 1991. There are 24 member certification bodies […]

First of all. Determine the driving method of LED lamp. If the lamp is driven by constant current, forward current shall be within specification. On the contract, if it’s driven by constant volt […]

MW developed many power supplies series specifically for LED application.    Single stage PFC was used in such developments due to low cost.    This topology has the following restrictions: AC fluctua […]

LDD/LDH series comprises switching components; series or parallel connection will damage these switching components.

LED Drivers are recommended operate at full load as long as it observes the working temperature specified in the datasheet, which means Tc measurement results should be equal to or less than the state […]

First, you have to know your Led lamp specification in order to screen out a suitable Led driver range (Wattage, Voltage, Max Current CC or CV). From those ranges, further check a compatible dimming f […]

MW has several charger products, and we suggest choosing them first. Chargers would be more suitable since they are designed for charging applications. Safety & Approvals should be taken into acco […]